Correct Operation And Precautions Of High Pressure Washer.

​High pressure washer is a good cleaning equipment. So how to use it correctly to improve its working efficiency and extend its service life? Here are some ways to use high-pressure cleaning machine correctly:

1. Clean machine impurities. Before using the high pressure washer for cleaning, clean the rust and impurities in the high-pressure pipe and equipment.

2. Use clean tap water. Clean tap water must be connected directly from the faucet to the water supply of the machine. Sand and other harmful impurities in the water are strictly prohibited.

3. Use high-quality fuel. High pressure washer fuel should use high-quality fuel as much as possible. There must be no lack of oil in the tank, and water and impurities are strictly prohibited in the oil.

4. The correct switching procedure must be strictly followed. When turning off, the hot water should be turned off first, and the cold water should be turned off after continuous flushing until the equipment is completely cooled. This is the correct operation process.

5. It is forbidden to place the high pressure washer in an environment with a temperature below 0 degrees Celsius to prevent the remaining water from freezing and affecting the use of the high pressure washer.

6. The amount of lubricating oil in the water pump must be maintained and must not be less than the oil level limit of the red dot in the center of the oil window. In addition, the diesel filter needs to be replaced or cleaned regularly.

7. It is necessary to follow the work of regularly flushing the scale deposited in the water inlet pipe of the high pressure washer.